Confirmed! Nice & thx!

Issue has been fixed now

Its related to Fluffys Work tab and Plug and play joiner it seems like, the message "[Plug and Play Joiner] transpiler failed" is only printed if it couldn't patch something in Pawn_WorkSettings maybe? I don't really know, please contact the dev of Plug and Play Joiner instead

This doesn't seem to be related to PriorityMaster at all

There is a problem now with Plug and Play Joiner

Plug and Play Joiner] PriorityMaster-compatibility implemented
[Plug and Play Joiner] updating the lowest possible prio to 9 from PriorityMaster
[Plug and Play Joiner] transpiler failed

Gives a red error message but no exception.

that helps, ill figure out whats causing it, just wanted to make sure i wasnt like having a brain spasm XD.

It has settings, and shows up for me. Maybe you have a mod conflict?
https://imgur.com/a/fgbdGeX

I am sorry I must be blind or just really stupid, how does one open the settings of this mod? I dont see it in the mod options I seem to remember it showing up there once upon a time but its not there anymore.

Startup Impact mod is useless. Use devmode to check startup time (https://www.reddit.com/r/RimWorld/comments/1hfczop/analysing_and_reducing_startup_time/) .

That seems really odd, I would highly doubt that PriorityMaster is taking 30 seconds to load.
It only applys a couple patches and loads its settings and colors on startup.

I have a relatively long mod list, but this mod adds the most time adding about 30 secs to my startup time. Here is what it looks like in Startup Impact: https://imgur.com/a/8RJBu1a

What do you think causes this, and how can I reduce this time?

But please note that if you are using it with Fluffy's Work Tab you will need to re-do your Pawns' priorities as PM has to patch Fluffy's Work Tab's code in order to save double digit priorities as its not supported in Fluffy's Work Tab.

Yeah there should be no problem in doing so

can this be removed from an ongoing game ?

Hey, I love your mod! I only play in hardcore mode, so I'm rly missing an import function. That I don't have to redistribute everything every time I have to start a new Game. Its a bit Annyoing to change 35 Prioritys. Would be nice if i could Export "my Priority Plans". Maybe that would be an idea for an extension to the mod. Best regards!

Sounds good!

Seems to work just fine with Complex Jobs. Thank you!

I don't know, you can try and tell me if it worked or not.
PriorityMaster at least doesn't add any direct support for it.

Is it compatible with Complex Jobs?

Added in latest update :)
With the additional benefit of WorkTab working again :)

1.6?

Information supplement: I feeling lag, it's because using RIMMSqol

I will look into it soon

Be noticed incompatibility with this version Work Tab . SW id: 3453549086
Causing ingame mod config panel of PriorityMaster disappear, and setting options of WorkTab's [min/max priority] disappear.
And increasing response time of work tab clicking (especially when having a lot mods, that's really laggy) I feel so, but not sure.

Submitted the report with all info I can give

It happens upon loading of the save, as far as I noticed.

It doesn't show errors that the problem, forgot to mention that the thing just changes the list to 1 and (on the 10) an binary (1,9,1,9,1,9...) time schedule.

Sorry I can't really do anything with that description, could you please open an issue on github with an error log and exactly what u did to achieve whatever happened?
Also a full list of mods you are using.
-> https://github.com/Lauriichan/PriorityMaster/issues/new/choose

So I think that there is a error with 1.5 versions of Fluffy's work tab, as if the priority is above 9 upon load it will be messed up.

I fixed the issue, the person that updated the mod felt like randomly renaming classes for no reason.

I won't be able to check this out now bur I would appreciate it if you could report bugs on my issue tracker instead, thanks :)

Thank you, but I get a red error:
Error while instantiating a mod of type PriorityMod.Core.PriorityMaster: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Null method for Lauriichan.PriorityMaster

The error happens only when I add Plug and Play Joiner in my modlist, before or after your mod.

https://gist.github.com/HugsLibRecordKeeper/7d9d0975263fb535579966074d8f6578

Fixed in latest update - all I had to do was to check for their mod id

Can you update the fix for Plug and Play Joiner (Continued) please?

okay, yeah that sounds about right.
PriorityMaster doesn't really save priorities, it only saves your settings and doesn't do anything else to vanilla mechanics.
Therefore the issue has to be the Work Tab mod, I've also heard that the Work Tab mod is supposed to not work with the Multiplayer mod, therefore I would've asked you if you are using that Multiplayer mod first x)

Interesting, apparently my issue would be caused by the actual Work Tab mod version according to some comments, I will give this another try because I really loved the idea.

I have no log or anything but my priority keep getting messed up after a reload, I use no other priority or job altering mod, only work tab mod.

Usually this is the case yes.
I would always recommend putting the Multiplayer mod as far up as possible and PriorityMaster basically below that

@Lauriichan
In Rimworld, the conflict winner is the one at the top of the load order right?

If so, the bad version of the DLL is coming from Vanilla Extended Framework. I also compared against the DLL in the Multiplayer mod and the checksum differs.

Okay so I can't fix this issue.
This is an issue with one of your mods containing an outdated version of the Multiplayer API.
You should ensure that the Multiplayer mod is loaded directly after the official content of Rimworld (Core / all DLCs) and that PriorityMaster is loaded after the Multiplayer mod.
Sadly I can't tell you which mod that might be the cause as many mods on the workshop include the 0MultiplayerAPI.dll file with various versions in order to work without the Multiplayer mod installed.
PriorityMaster doesn't include the API file as its not required for this mod and expects the API to be present if the Multiplayer mod is installed (which is also true) however in case of an incorrect mod load order it might be that the wrong version of the API is loaded. (It should be the latest one available, meaning keeping the Multiplayer mod up2date is crucial)

I look into it, it makes sense that the Multiplayer API is related but so far I don't know how to fix it specifically

@Lauriichan
From more testing, I noticed when I removed some mods that had /Assemblies/0MultiplayerAPI.dll the error went away.

There are a lot of mods with that file though so I'm not sure which specific one caused the problem, but from testing it might be multiple.

Dubs Central Heating was the last mod I removed when trimming the mod list for testing that made the error go away. But on my full load order, removing that alone wasn't enough.

Latest version (1.5).

And when I said I got that error "after the update" I meant the Sep3 update of this mod. I didn't have that error before then.

Which version of RimWorld are you using?

Getting this error after the update. Sounds related to the change notes (reference to MP).

Error in PriorityMaster, assembly name: PriorityMod, method: MultiplayerCompat:RunMultiplayerSetup, exception: System.MissingMethodException: Multiplayer.API.ISyncMethod Multiplayer.API.ISyncMethod.SetHostOnly()

Thank you!

I'll think about it but can't guarantee anything.
You can keep track of it here: https://github.com/Lauriichan/PriorityMaster/issues/2

Could you make it so that you can assign default priority separately when a pawn has a passion?

It would be nice to automatically set work pawns have passion in as 1.

@Frog Z. This is due to me changing the mod id. In theory I could fix it however I see no reason to as the community updated version fixes this already. Please check out: https://steamproxy.com/sharedfiles/filedetails/?id=3250322299

Take your time. I have already adapted to the way of vanilla.