Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ei tarpeeksi arvosteluja
Tsubame Karasugane | SteamPowered Fighter
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tiedostokoko
Julkaistu
789.846 KB
5.3. klo 0.25
1 muutos ( näytä )

Tilaa ladataksesi
Tsubame Karasugane | SteamPowered Fighter

1 kokoelmassa, tekijä MarcusAurele
The SteamPowered World War
3 luomusta
Kuvaus
In an alternate history where gasoline engines were never invented, a world war erupted in 1924, fought with steam-powered machines. As the conflict progressed, technology advanced, leading to the development of lightweight metals capable of withstanding extreme pressure.

Engineered by Tsubame, the Karasugane was first introduced on the battlefield in 1927. Designed by Japan for rapid interception of enemy aircraft at high altitudes, it excelled in both top speed and climb rate. However, this performance came at the cost of some maneuverability.

Armament/equipment

- 2 Light autocannon
- 2x200 ammo

Specs

Crew: 1
Length: 13.50m
Wingspan: 16.25m
Height (gears up): 2.5m
Mass: 3930 kg
Powerplant: 6 medium cylinders boxer Engine
Steam Tank: 3x700L at 60Bars

Guide

1- Start the steam generator that spawns with the plane
2- Connect the generator to the plane using the fluid hose and fluid anchors
3- Wait until the plane tanks are filled (about 59-60 bars), in case you do not want to wait a full tank, you need at least about 5 bars in the tank to fligh.
4- Once the tank have enough pressure, you can disconnect the plane and climb inside.
5- Once inside, increase the Engine Buffer Pressure Target, this values needs to be above 5 bars to fligh. Lower values can be use to taxi (like 2 bars). Increased pressure means increased performance
6- Turn the engine on and wait for the radial indicator to be green
7- Once the radial indicator is green it means the Engine pressure is at least 80% of the targeted pressure, which is enough to start flying.
8- The up/down arrows controls the collective, which is basically your throttle. Below a collective of 0.1 the wheel brakes are engaging. The brake are at their maximum when the collective is at 0
9- Allowing Engine Buffer depressurisation will reduce engine efficiency at is will dump any excess pressure in the buffer. However this allows additional control on the pressure, especially if you want to reduce it, as otherwise you need to wait for it to be used by the engine.

Notes

The creation has some comfort features that are not theme realistic, such as autopilot, but are here to make the experience in stormworks more pleasant

French plane shown on screenshots: https://steamproxy.com/sharedfiles/filedetails/?id=3438322906
Check out the collection for more : https://steamproxy.com/workshop/filedetails/?id=3438356345

Feel free to report any issue in the comment
Remember to like and favorite if you like this creation :)





All the microcontrollers are made by MarcusAurele
DO NOT REUPLOAD OR USE ANY PART OF THIS VEHICLE WITHOUT PERMISSION from MarcusAurele

You can use microcontrollers from my creation under the condition that my creation is linked in the description of your creation

Tags:
WW2, Steampunk Fighter Plane, World War 2, Japan
3 kommenttia
Archjody 6.3. klo 17.02 
yea i think Steampuck is cooler
MarcusAurele  [tekijä] 5.3. klo 20.14 
Thanks
The inspiration is the Kyushu J7W which never pasted the state of prototype. I was heavely inspired by the J7W to make the Karasugane (which is obvious given the looks) but I did not try to make a 1:1 copy. Hence the original name of Tsubame Karasugane, Tsubame for the brand name and Karasugane for the plane name to have something more steampunk themed
Archjody 5.3. klo 18.21 
Nice plane its looks cool but its the only ww2 Plane for Japan was a pusher Prop