Subscribe to download
Serious Universal Dashboard

Serious Systems Presents:
Serious Smart Screen / Serious Universal Dashboard SSS

-- UPDATES AND BUGFIXES have been frequent since launch make sure you are using the latest version

--Use Freely in any creation

-- A polished project is important. please let me know if you find any bugs

--comes with a tractor for a working example

--IF YOU DON'T WANT ENGINE FEATURES: there is a Lite Version that is display only and none of the advanced features other than Touch and GPS ( it is behind the 'TEST' example)

--input guide at bottom

Advanced Universal Dashboard Display can add advanced Features to any vehicle

Major Features:
Touch to Start
Configurable smart Idle
Variable Clutch
GPS Navigation unit
Cruse Control
Overheat Safety
Starter Controller

Minor Features
Configurable Speed units ( KPH, MPH, KNOTS, MPS)
Configurable Buttons (Requires SSS Button Box addon)
Configurable Clock (OFF, 24H clock, 12 Hour clock)
Fuel level display and auto read
Battery indicator + recharge detector
Engine Temp Indicator
Gear indicator
Weather Temp
Color changing Speedometer
Color changing RPS Gauge
Odometer

Feature Details:

Touch to Start:
Gone are the days of keys and buttons to start your creation touch start on the display and this starts your creation
this means you need the display powered on, you can use either a constant on signal to keep the display on or i like to use a player sensor personally.

Configurable smart Idle:
allows you to set what RPS your vehicle will idle at and the idle power level meaning how much throttle power your vehicle will use from 1 = 100% or 0.20 = 20% the heavier your vehicle the more you need usually 0.10 - 0.20 is best for most creations

Variable Clutch:
This will massively improve any vehicles startup acceleration. if the engine is struggling to turn as it normally does accelerating from 0 it will control clutch to reduce it if the engine is losing to much power this gives light vehicles a massive speed boost and hugely benefits the responsiveness of heavy vehicles

GPS Navigation unit:
Relatively standard GPS, it shows where you are, where your waypoint is, you can zoom in and out, reset and toggle coordinate display on reverse the map changes to your rear view camera.

Cruse Control:
Press on the speedometer it will activate cruse control pressing it again will deactivate it.
when the speedometer is pressed the cruse control will try to maintain your current speed
it may have some issue if it is trying to maintain a speed that your gears will change at
if the cruse speed is lower than the speed you set it at then your vehicle needs a higher power to weight ratio

Overheat Safety:
will prevent your engine from exploding and display a warning on the screen, if you continue to disregard the warning and keep pushing it will stop engine throttle until the engine is cool enough, you can still drive in this state but it will make you slow until your engine becomes safe.
in the config (Max Engine Temp) is the temp your engine explodes at typically that is 115.C but can be different that's why you can change it

Starter Controller:
this works with your idle to insure you only use the starter when absolutely necessary. the starter is one of the loudest most power draining parts on a vehicle and it needs to be controlled properly.

Configurable Buttons (Requires SSS Button Box addon):
on the SSS there are 3 configurable buttons, you can change the color or if they are displayed of not it requires you to use a composite connection to the 'SSS Button Box addon in the button box itself there are 3 on/off outputs, simply plug it w.e you want to activate with each button. button 1 is on the left, button 2 in the middle and button 3 on the right
you should easily be able to find it sitting on top of the SSS in the WS Creation.

Fuel level display and auto read:
Displays your Fuel level in a 0 - 100% meter
i must have manually entered my fuel tank capacity a 100+ times this is why i made an auto read.
the very first time and the first time only that you start your creation it will do a check and determine how big is your fuel capacity it needs the tanks to be full when it is first powered on to function properly.

Battery indicator:
the battery icon will change to green if your battery level is increasing / recharging it will turn red if less than 25%
inspired by cellphones

Engine Temp Indicator:
Displays your engine temp in a 0 - 100% meter and if your engine temp is increasing it will show a little red plus +
if your engine is in a state of cooling it will show a little blue minus -
and it glows a deeper red as engine temp increases

Gear indicator:
the gear indicator is probably the most confusing of all to connect. all you really got to do is add a composite out to your current gearbox. in your gearbox get a composite read on/off and connect and connect it composite out and connect that to the SSS. for inputs in channel 1 connect w.e activates gear 1, in channel connect to w.e activates gear 2 the SSS is designed to handle up to 9 gears max. it will read 'D' if no gears are active. in the workshop unit the example side has a example gear box to get a visual idea if you still don't understand.

Configurable Speed units:
Change between popular measurements of speed KPH, MPH, KNOTS and MPS

Configurable Clock:
you can just turn it off or switch between a 24 hour clock or a 12 hour clock

Weather Temp:
Shows how hot or cold the weather is also changes color

Odometer:
measures distance travelled in selected unit of speed. it can be toggled under Clock Settings
(MPS does not function with the Odometer)

Color changing RPS and Speedometer gauges:
i really wish i was able to make them color customisable but i would need to rearrange allot to do so, perhaps it will be available in a future update if people really want to change it i can show you how to do so in the code
as of now speed transitions from blue to red as speed increases
and RPS transitions from green to red and RPS increases




INSTALLATION GUIDE

COMP
Touch output - goes to screen comp
Physics sensor - goes to a physics sensor (blue arrow points forward, green arrow points up)
Gearbox - to gearbox comp set output channels with corresponding gear ie CH 1 = gear1 CH 2 = gear2 max of 9 diagram above w.e activates your gears connect it to its corresponding channel
SSS Button box - connect to SSS button box provided, connect w,e you want to activate with buttons 1,2,3
Seat - connect to seat controller
Engine Cylinder - connect to engine cylinder

ON/OFF OUT
Activate Systems - this is a replacement for a key, anything that turns on when your creation does connect to this
Starter - connect to engine starter

VIDEO
Video - connect to 1x3 display
Rear Camera - connect to a Camera

NUMBER OUT
Clutch - connect to main clutch
ECU Throttle - connect to the normal seat input of any ECU

NUMBER IN
RPS - connect to crankshaft
Weather Temp - connect to a temp probe
X Cord GPS - A connect to a keyboard to set waypoints
Y Cord GPS - B
Time - connect to clock
Fuel tank - connect to fuel tank , tank content
Battery - connect to main battery



Contains 1200+ Lines of Code