Subscribe to download
No 3415 Steam powered locomotive

1: Open air and exhaust valves and increase boiler temperature
2: Start a fire
(3): Once the temperature of the boiler has exceeded 100°C and the pressure is stable, you can build up more pressure by adding water in the loop (DO NOT EXCEDE 10 bars! The boiler will explode)
4: open the steam valve so steam can power the turbine
5 : engage clutch. To go at full speed the clutch need to be around 0.8, with wagons this might create will slip

You can control your speed by regulating the clutch and the steam valve

If pressure is dangerously high, decrease pressure by opening the corresponding valve

This locomotive is based on the ATSF Steam Locomotive No 3415.
Without load it can climb up to 180 km/h. It is equiped with a radio to control the direction at intersection. The locomotive is compatible with other SDEF wagons and an addaptater to most connections can be made easly. No information travels between this locomotive and wagons ( might change in the future )

Wagons used on pictures :
https://steamproxy.com/workshop/filedetails/?id=1764022226
https://steamproxy.com/workshop/filedetails/?id=1763292445

SDEF discord https://discord.gg/KdYCRC42Kf

This creation is entirely made by MarcusAurele
DO NOT REUPLOAD OR USE ANY PART OF THIS CREATION WITHOUT PERMISSION from MarcusAurele