Train Simulator Classic 2024

Train Simulator Classic 2024

Munich to Innsbruck (Route - Reuploaded)
64 commenti
Danny  [autore] 19 lug 2024, ore 23:23 
Np, hope you enjoy at least vern :)

(There is another version will almost all the munich point of origin routes, well except for pegnitztalbahn and the nuremburg route, a slight gap between those).
BigVern 19 lug 2024, ore 17:56 
Fantastic Danny. I only just bought Mittenwaldbahn having owned Munich to Garmisch for ages. Looking forward to doing a few runs with vintage stock across the combined routes.
Jakob Hermann 29 giu 2024, ore 22:07 
I like that route. Nice to feelings while driving. I like to jump over the border with Austria. Well done. :) It will be nice to get something like: Munich - Vienna but I know that Train sim have some limits. :)
Cyclone 19 giu 2021, ore 18:40 
Yes, I did find the services. I was just hoping someone had already made up the full scenario by now. The train goes Munich –> Tutzing –> Weilheim –> Murnau –> Garmisch-Partenkirchen –> Mittenwald –> Seefeld in Tirol –> Innsbruck every four hours per the page for Weilheim Oberbay station, but others suggest only an hourly service with Seefeld in Tirol possibly omitted and Innsbruck sometimes in brackets as a "not every trip" stop. So I wonder if there have been service changes along the line to the frequency and station stop schedules.
Delfino 19 giu 2021, ore 14:25 
Most services from Munich indeed go as far as to Mittenwald. There was a Karwendel ICE which went I think from Berlin and you can follow it's route from Augsburg via reversing and Munich to Innsbruck (other Danny's merge). If you want to try some real schedule driving I higly recommend ThirdRails software - you will find real schedules and even have map and announcements.
Danny  [autore] 19 giu 2021, ore 13:49 
There are RE services from Munich to Mittenwald I believe (so go through Garmisch), and other RE services that go to Innsbruck from Munich (and that's just wikipedia on Garmisch station :) ). I believe there are also IC services that go the whole route and even an ICE service too (ICE T)

Looks like there is one (at least that i could find) - https://steamproxy.com/sharedfiles/filedetails/?id=1650661222&searchtext=%22Munich+to+Innsbruck%22

Services - https://en.wikipedia.org/wiki/Garmisch-Partenkirchen_station#Rail_services
Cyclone 19 giu 2021, ore 13:21 
Just noticed this one and have driven the main 426 scenarios on the Munich-Garmisch. Do we know if there are scenarios utilizing this full route? I'm guessing that there are very few services that would cross through Garmisch on a service on both ends, and that Garmisch is usually more of a terminus?
Bahnferund 23 gen 2021, ore 17:53 
how did you do that with the joining of the two routes
Danny  [autore] 21 set 2020, ore 9:22 
I can't make any more changes to this route - as it's set to final, I'm really sorry.
gih1332 21 set 2020, ore 6:38 
Munich to Innsbruck for Innsbruck Drive Tutzing Station passing Truck 2 Change Plaese
akmatov 14 apr 2020, ore 19:29 
Ah ha, another one and I happen to have all the pieces. Thx
Danny  [autore] 11 feb 2020, ore 0:59 
Unfortunately not that easy to do, it is possible but with different points of origins its a lot of work without an automated tool. (I know of the shared point though, i did the scenery for wutachtalbahn ;) )

Lots of work, literally means an unrealistic amount unfortunately.
PlagueDoc 10 feb 2020, ore 23:47 
Is it possible to combine the Konstanz-Villingen route with the Wutachtalbahn? They share a common station, Immendingen which is an intermediate station on the Konstanz-Villingen line and is the starting point for the Wutachtalbahn. I doubt it is doable though, as two different developers built the routes.
Danny  [autore] 30 gen 2020, ore 21:30 
You're welcome :)
raygun13 29 gen 2020, ore 22:31 
Holy gumdrops, it works:) It seemed logical to me that if I access Quick Drive under the Quick Drive Tab & Career under the Career Tab & Free Roam under the Free R Tab it would work the same for Workshop Scenarios. I just tested it and I can see the entire map and I just drove from Munich right through Garmisch. I'm delighted your route works so well and I appreciate your fast and friendly help! :steamhappy:
Danny  [autore] 29 gen 2020, ore 20:42 
You don't press drive in the workshop tab, a route doesn't work like that :) - You would go to quick drive to find the route (or build). Although if you click on the collection below the title above there will be a few more in there :)
raygun13 29 gen 2020, ore 18:27 
Thanks for the quick response. I tried clearing the cache but, no luck. My computer works well for all other TS modes and for all other games as well. This is the first Workshop Item I've tried as you're reputation looks great! Is there another TS Workshop Item you could suggest I try just to test if my computer can run any of them? I assume you simply click the Workshop Tab within the game and highlight the item and then click Drive? However, as soon as I highlight the item my computer freezes and I get the following error: "timed Check For install: Has no Uninstalled Synced items" Thanks again!
Danny  [autore] 29 gen 2020, ore 12:07 
It should be, I think the workshop thing might be related to the game than the route, but have you tried clearing cache (go to settings then tools, and that might work, aside from that I'm not really sure what to suggest if it's the core game at fault?

Although the route has been set to final 2.5 years ago (10th July 2017), so i can't make any changes.
raygun13 29 gen 2020, ore 9:43 
Wondering if this route is still working? It looks great and I have both of the required routes to use it and a new gaming laptop, but sadly my computer freezes when I highlight it in the Workshop Tab. The only way out is to do a hard boot. Any help will be appreciated!
omihalcon 4 nov 2018, ore 16:59 
Excuse me I thought that a career scenario appeared instead there is only the quick drive.
Anyway thanks for the merge, I bought the two routes just to have the path you did.
Danny  [autore] 3 nov 2018, ore 22:17 
This workshop route doesn't need the ICE T? This route only needs Munich Garmisch and Mittenwaldbahn?

The route only comes with Quick Drive, what scenario do you mean?
omihalcon 3 nov 2018, ore 20:25 
I have bought the two routes but scenario in workshop don't start, i'm not ICE-T loco, what add-on i need?
Scenario in Quick Drive work perfectly
LokiToots 13 ott 2018, ore 2:05 
exactly what I like
LokiToots 13 ott 2018, ore 2:05 
no AI which is good and not needed lol
Danny  [autore] 12 ott 2018, ore 18:26 
There won't be any AI unfortunately, for AI to appear it must be part of the train's consists which I can't change from a workshop route upload.
Registered Flex Offender 12 ott 2018, ore 17:08 
Is there no AI in the quick drive scenarios?
LokiToots 30 set 2018, ore 2:05 
lol just kidding
LokiToots 30 set 2018, ore 2:05 
good
LokiToots 26 nov 2017, ore 17:51 
I don't have Munich-Rosenheim
Danny  [autore] 26 nov 2017, ore 17:49 
There already is a route that covers that?

http://steamproxy.com/sharedfiles/filedetails/?id=1099706245
LokiToots 26 nov 2017, ore 17:46 
can u do Munich to Augsburg and Innsbruck by merging Munich-Augsburg Munich-Garmisch and Garmisch-Innsbruck
springer6 30 ago 2017, ore 23:11 
Great merged route. Thanks for doing this. Just run the ICE T fom Munchen to Innsbruck and "you can't see the join". Thanks again.
uspesny_mekkys 24 lug 2017, ore 15:17 
Oh great :steamhappy:
Danny  [autore] 24 lug 2017, ore 13:17 
Yes it is possible - I just haven't had the chance too yet :) - I plan too though :)
uspesny_mekkys 24 lug 2017, ore 12:43 
Would it theoretically be possible to add the Garmisch to Innsbruck route to the already merged Munich-Rosenheim-Augsburg-Garmisch route to create an ultimate F R A N K E N R O U T E?
Danny  [autore] 10 lug 2017, ore 18:54 
Route is now final and can no longer be updated - for those that want to upload workshop scenarios you now can.

There weren't any scenarios for this route before - but now they can be uploaded :)
massimiliano.modugno 8 lug 2017, ore 17:53 
do you know where can I find a scenarion for this amazing route?
mortia 8 lug 2017, ore 12:30 
I have the RSSLO versions of both the Mittenwaldbahn and the Tirol Route (Brenner to Kufstein via Innsbruck.), These 2 routes automatically merge. My DTG Munich to Garmish merges with my RSSLO Mittenwaldbahn so I can run the Munich to Insbruck route without visible track.
Danny  [autore] 6 lug 2017, ore 17:18 
On this route you can't run from Munich to Brenner, only from Munich to Innsbruck, although do you have the Munich to Garmish route? Although I haven't heard about the Austria Tirol route though? Where is this one?

(although when you say Mittenwald do you have the RSSLO version or the DTG one?, this route needs the DTG version of the route and won't work with the RSSLO version )

DTG one is here - http://steamproxy.com/steamstore/app/448192/Train_Simulator_Mittenwaldbahn_GarmischPartenkirchen__Innsbruck_Route_AddOn/
RSSLO is here - http://www.rsslo.com/product/mittenwaldbahn-route/

they are both different routes - and I suspect the DTG route won't join up to the route that goes to italy.
mortia 6 lug 2017, ore 16:27 
Hi Danny. When I download this route I am told i need th install the Mittenwaldbahn route which is already installed. I have reinstalled this route and your Munich to Innsbruck route. All is fine but i have no tracks or catenary wires. When i downloaded the Austria Tirol route it automatically merged with the Mittenwaldbahn route so i I can run from Garmish in Germany to Brenner in Italy. Any suggestions as to my problem?
psihala 2 lug 2017, ore 6:23 
@Danny,

The Mittenwaldbahn route, when purchased, has three downloads (the route, and two train sets by the looks of it) and that might be the three parts biplab dey is referring to.

I've just downloaded your workshop file. I haven't had a chance to play it yet, but I'll let you know if I run into any issues.
Delfino 27 mag 2017, ore 11:45 
I drove the whole route and haven't noticed any problems.
biplab.dey 27 mag 2017, ore 11:27 
ok... thanks.. let's try agaim
Danny  [autore] 27 mag 2017, ore 11:25 
in three parts? On this route all you'd need to do is press subscribe and that's it?

I just deleted my route and redownload this one and have scenery at munich?
biplab.dey 27 mag 2017, ore 11:24 
But now I am suscribe the route again and make downloade uninterruptly.. but till it doesn't work
biplab.dey 27 mag 2017, ore 11:23 
I have downloaded it in three parts in three seperate times.. Is it the reason?
Danny  [autore] 27 mag 2017, ore 11:15 
That's strange it sounds like the route hasn't downloaded properly to me
biplab.dey 27 mag 2017, ore 10:59 
I have started to play from Munich to Innsbruck. I found only stations, train and electric post and surrounding few buildings.. the track and signal were missing..
biplab.dey 27 mag 2017, ore 10:58 
I have Munich to Garmish route
biplab.dey 27 mag 2017, ore 10:58 
Garmish - Innsbruck route. and combined Munich to Innsbruck