Hi, I love this a lot, but theres a problem. Between Beacon and New Hamburg, specifically in the Chelsea area, my game crashes every time. I'm not sure why...

Route crashes north of Beacon.

There are at least three scenarios found on the Train Sim Community Page!

Also you can actually take any work shop route in the Hudson Content folder and drop it into this route! This would allow you extend these into Albany or Poughkeepsie allowing you to simulate a full operating run of both AMTRAK and Metro North Crews! Runs to Schenectady are actually good for rescue runs, the proposed Commuter Rail link, and summer festival shuttles!


Grid Coordinates for Activity Planners:

Albany:
42.64828 73.74154

Hudson
42.25168 73.79742

Poughkeepsie
41.70859 73.93847

I am working on a rework for two AMTRAK scenarios for the route! The first will be an update to the Summer of 2018! The second will be a reworked fictional Lake Shore Limited Scenario also operating into Grand Central (which never actually happened)! I am having issues with train 448 taking the consist down the Post Road Branch instead of leaving it for the P32 to take it over! Hopefully you guys would like the rework! Heads up though as you'll need quite a few add ons to make the scenario work!

Are there any scenarios for this route?

Now that this has been out for a while, would you consider extending/modernizing the current DTG Boston and Albany route? (Boston to Albany Rensselaer/Selkirk including the full Post Road branch) Seems there are not many folks with your talents. Thanks again!

why does my game keep crashing north of beacon?

reply&question to CYCLONE..I believe I found said subscription folder; "steamapps/common/RailWorks/content/Routes/6ad24555-385f-479d-b7e8-14debf77619d.
OK?
You say extract somewhere!
Where do you suggest within the PC file/folder hierarchy? Where can/should I put it?
Where does it work for you?
I'm AOK with the unsubscribe part.

Of course, you can also do what I do: subscribe, find the subscription folder, extract the scenario somewhere, unsubscribe, subscription goes poof, scenario stays where you put it. Also shows as an Official scenario.

mimar - as you found out, never use the Workshop menu. Steam likes to add tags to try to promo shit you don't need because they want their cut for publishing stuff you don't actually want. They did it with a York-Peterborough scenario pack, they did it with the Metropolitan Line, then something else, and then the Wessex Line. Often it was before the item was released (Wessex and Metropolitan a month and a half in advance - each!), meaning no one had it except through the JT site; one of my own items got tagged with the scenario pack in error, too. Either a problem with DTG tagging it as a default item by accident during QA testing or a problem with the Workshop done manually by Steam to try to create sales. Both blame the other. Mysterious.

You can manually edit out bad tags from scenarios, and I think also from routes, by editing the correct files directly. ScenarioProperties and I think RouteProperties. Heck, remove all tags!

@ajptech Are you still having this issue? I have the exact same crash in the exact same spot every time---it used to work fine, but I suspect that the most recent update broke something.

I was doing a quick drive scenario from Croton Harmon to Albany. When I was between Beacon and Poughkeepsie stations, the game crashed and an “out of memory” error popped up. Has this happened with anyone else?

My bad. I can NOT DRIVE w/out the full DLC as a workshop item. Horray I CAN continue to play as Quick Drive. Love rolling under West Point!

I had this great workshop item working just fine PRIOR to the recent update. It had not ALL, but did have the recommended DLC installed. Now with the update..and NOT having Donner Pass nor Norfolk S. C.D. ... will NOT allow DRIVE from subscribed workshop menu. Darn shame!

Thanks 👌

NEW REFRESHED UPDATE:
Reworked scenery and vegetation along both lines which include:
-In Cortlandt & Peekskill areas on the Hudson Line
-The addition of Bannerman's Island Castle near Breakneck Ridge
-Between Haverstraw and Highland on the River Line, most significantly in Stony Point, Bear Mountain & Newburgh
-The addition to Newburgh with the accurate track elevation

Chqnces: Will look more into it in the near future

Ok I have another question can I get a good njt gp40 sound and a loud nice horn

Was hoping the missing scenery here would be fixed: 41.240873, -73.976679

traphousemrshiesty79: Yes, but not done by me.
https://www.trainsimcommunity.com/mods/c1-train-sim-classic/c11-routes/i3816-project-pascack-valley-line-25

mimar: The update is automatic and for any further work on that, no

Is there anyone with Passaic vally line revamp cause the qd from spring vally don’t work with assets

Do I need to UNINSTALL this prior w/shop item, and then resubscribe to new?
Also thanks for these great routes!
Any inclination to do ANY add on work for LIRR?

Peekskill and garrison stations only show up when i click them in the editor

Why doesn't this appear on my quick drive menu anymore? I subscribed to it, but it's not showing up.

NEW UPDATE:
Speed limit fix between on the Hudson Yonkers & CP19 (South of Hastings) of 70mph instead of 75mph

csalute21: Would be much appreciated but the issue is non-DTG assets will not appear on any workshop routes so it's a misfortune for any custom items

Great route I happened to got the signs for the metro north diesel stations if you want maybe there is a way to make custom signs because ive got all the signs up to Poughkeepsie

Route crashes near Riverdale going north. I tried reinstalling and still crashes.

NEW UPDATE:
Fixed missing scenery/vegetation along Hudson Line around Beacon

ChrisReb: Weird, try using a compatible loco, and the destinations vary, especially if using an electric. Diesel you can go anywhere.

Unable to use QD as always says incompatible loco, also making scenarios has issues finding destinations

This as a fantastic addition!

NEW UPDATE:
-Added missing portions of the Hudson River between near Tivoli, NY
-Vegetation fixes in Staatsburg, NY
-Track terrain fixes along CP125 in Stuyvesant, NY

lennystrainz: Weird, had a similar issue but only because I was using my editor constantly en route. Try refreshing.

NEW UPDATE:
-Vegetation fixes along River Sub between Stony Point & Cornwall

Route crashes near Garrison heading North.

Ah nvm, It was just installing

Is it supposed to take a long time to download? It has been a continuous problem for me with it downloading slow when it downloads really quick for others

Thanks 👌

NEW UPDATE:
-Fixed/improved scenery along the Hudson from Garrison to Poughkeepsie
-Addition of missing RR crossing on the River Line (Greenbush Rd in Tappan, NY)
-Fixed/improved scenery in Tappan, NY

Chqnces: Noted and will fix

I've noticed Tappan needs some work; The Old Tappan Road area is missing scenery and Greenbush Road is missing.

NEW UPDATE:
Fixed/improved scenery in Cortlandt & Peekskill Areas

Any areas in need other fixer-upers do let me know!

Cyclone: That is unknown at the moment

Is there any chance we can get a final v1 version so scenarios can be published for it?

Cyclone: None at the moment unless minor tweaks come up

Hi! What is the status of this? I am sure folks would love to see scenarios for this route, but we can't post them on the Workshop yet.

Teeman, on that subject, once someone creates a Standard or Career scenario, the route will appear under those tabs as well. You can even make your own via the Build menu if you are so inclined to try your hand at it!

Teeman: Under Quick Drives the route should appear. If not, go to the "Build" tab and try to find it and run from the scenarios.

I have the 2 most important addon's you mentioned need but where is this route going to be located?