nice

please make golden gate 1:1

A very nice asset, basically unusable as a 4 lane road unfortunately.

I used it in my city and it looked really nice.

what map is this?

it was this mod that was causing it: https://steamproxy.com/sharedfiles/filedetails/?id=2858591409

my B segment and approaches show up like this: https://i.imgur.com/0zlD3V3.png
any help?
they are at appropriate segment length

Walked over this last summer, what a beauty! And glad it's in-game

thats exactly what i use. the only thing i cant change is the height of the cables and thickness of the bridge deck which is my problem. i can make the roadway wider and the towers bigger but the cables cant be made to go higher

@ZanderTheMander - you might be able to do this with PO and Node Controller...

i can send you screenshots of what i mean aswell. i would literally only need the bridge deck trusses and cables to be 1:1 in height the width of the deck i can stretch with nod controller to fit the POed towers

is there any way possible to make this network 1:1? it doesnt even need an asphalt road. i legit just need the network segments to be 1:1 in size then i can PO the towers and size up. i am willing to pay to have this done if possible. i would use the bridge networks for the red metal frame'trusses of the bridge and drag a highway network over it in place of the roadway if that makes sense.

@pingucanada - the whole bridge is scaled down by 1/3 to make it easier to use in Cities Skylines, as well as to make it more to scale with the normal game - a "full span" is already extremely large for the game, so true 1:1 scale would be almost unusable in most cases.

Wait a minute, why are the roads 4 lanes wide?

im looking for a draggable Brooklyn bridge could you make one?

thank you

can someone give me the game

@bsquiklehausen questnen will u make the costum highway for the golden gate bridge that is ground ?

@bsquiklehausen i am making a bridge asset but my city but i have no idea how to do it. I have the Model ready tho. Can you help?

@bsquiklehausen Can you do with 3 lane with each direction? This bridge or future bridges?

@Captainklums - I only have the two right now.

@bsquiklehausen thanks for creating, i love your bridges. Do you have other draggable bridges like this?

Screenshot
https://imgur.com/a/6awlG1h
I actually placed it where i first put the Bay Bridge and adjusted the landscape a little, because i needed the Bay Bridge on another location in this map and i want to use them only once per map.

Featured in my "Knight's Helm" series, alongside your Bay Bridge. Both magnificent structures span the Knight River. However, due to the theme of the city, they were renamed the "Paladin Bridge" and the "Golden Knight Bridge." :)

They look awesome. I was a little unrealistic with the approach ramps and I exaggerated the arc of the bridge, but it fits with the other exaggerations in the game.

I did notice some LOD issues with the trestle under the road deck, though.

Thank you for this awesome asset.

@bsquiklehausen - Thank you! A bug explains a lot. I was short of dittching the entire project, now there is hope.

@Pirazel - unfortunately that's a game bug. You have to go into each network with Mod Tools and manually rename the prefabs that throw the error.

I try to publish a set of custome roads for a bridge on the workshop, but I get a Duplicate prefab nameerror for Basic Road Elevated0, Basic Road Bridge0, Basic Road Slope0 and Basic Raod Tunnel0. It works fine with local data. How do I fix this? There are only two or three people who have published a draggable bridge so far. If you can't help, no one will enjoy my bridge but me.

I have a idea - Brooklyn Bridge draggable network

@shreddy - I'm aware that it's large, but the way that networks are packaged for the Workshop makes it hard to have it be too much smaller (especially since this is a pack of six networks!). Using Loading Screen Mod will help cut the actual size that hits your RAM down by a lot. All assets share 3 1024x textures.

120 mb for an asset? bahhahahaha

@Niro - oops - typo in there. Try hello at bsquiklehausen dot com

@bsquiklehausen

Thanks for the reply! I tried to email you but it seems like a valid email as it told me. Would mind if I add you and we can just chat on steam?

Hi Niro -

I'm glad you like my assets, and I appreciate your offer. With that said, making these assets takes dozens of hours, from research to modeling, to texturing to importing to uploading, and while I am open to commissions, $50 is not going to be enough for me to take on a project like that.

Email me at hello at bsquiklehauisen dot com if you want to talk more.

hi bsquiklehause

I really love the artwork you did... I am also a big of all the realistic assets and stuffs. I am just wondering if there is chance that I can ask do make a airport or two for me, I am a huge fan of building realistic airport. I don't what I can offer to make you interested in do so, but if you are down make one, I will donate $50 just to admire your artwork.

So, the airports I really want to build are the HongKong International Airport ，Beijing International Airport (terminal 3), and ShenZhen International Airport. Either one of them is awesome! If you are interested, please let me know, my email:[email protected] ... I can donate ahead of it just to respect your work.

Thanks
Niro

tobin bridge plz?????

Are you serious? Amazing work!

@bsquiklehausen have you thought about doing the Simon Kenton Memorial Bridge? [it crosses the river in between Maysville KY and Abeerdeen OH] and it is in a Gorgeous area/historic and a bit older than the Golden Gate as well [it was opened in 1931] https://en.wikipedia.org/wiki/Simon_Kenton_Memorial_Bridge

Looks great, just need to see with Karl moving in.

Can you make the Vincent Thomas Bridge in Los Angeles?

Oakland side of the Bay Bridge xD Btw AWESOME GGB :D Im from SF and I love it! Thanks dude!

还行

It would be more awesome if I can change the bridge's colors with Painter mod, as I wanted a bridge in my city that exactly looks like Golden Gate but is colored green instead of international orange.

Can you do: "Forth Road Bridge / Queensferry Crossing, Scotland" ?

there is actually 6 lanes on the golden gate bridge

both the golden gate and your bay bridges are incredible. keep it up!! youre the only one to conquer the dragable bridge.
both greatly detailed too.
thank you!

I'd love to see one of these for the Sydney Harbour Bridge, something different with the arch should be interesting (especially if you can get the rail line on it too).

@bsquiklehausen hey where can i go for updates on the M8 ?

@bsquiklehausen thanx bro im excited for the M8 =P

I would imagine him doing the Manhattan or Williamsburg bridges would be tough since they need unique road networks and would need the Metro overhaul mod.

I'd love to see some New York bridges! Perhaps the Manhattan, Brooklyn, Williamsburg, Queensboro, and/or George Washington Bridges?

Keeping it a secret, that's okay. I guess it's much better as a surprise. (Hopes for a New York City bridge!)