Train Simulator Classic 2024

Train Simulator Classic 2024

평점이 부족합니다.
Brens - Oebenau (V0.2.2)
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
파일 크기
게시일
업데이트일
8.533 MB
2017년 6월 2일 오전 9시 04분
2017년 6월 10일 오후 12시 53분
업데이트 노트 3개 (보기)
이 아이템을 사용하려면 DLC가 있어야 합니다.

다운로드 위해 구독하기
Brens - Oebenau (V0.2.2)

설명
New Version on rail-sim.de: https://rail-sim.de/forum/wsif/index.php/Entry/4244-Team-EZY-Brens-Bad-Altburg-BETA-V0-7/


(English is below)

[German/Deutsch]
Das ist eine fiktive deutsche Strecke von "Brens" nach "Oebenau". Sie ist ungefaehr 40km lang. Sie besteht aus zwei Teilen: Die Strecke von Brens ueber Burgen und Oberholm nach Oebenau und die alte Brenser Nebenbahn nach Oberholm.


-Brenser Nebenbahn (Brens-Oberholm)
Die Strecke beginnt im Alten zweigleisigen HBF von Brens und fuehrt dann durch die Stadt zum neuen HBF. Wenn sie den HBF verlaesst, fuehrt sie auf einer eingleisigen Nebenstrecke in das Brenser Hochland, mit Halt am Bahnhof "Am Berch (Brens)". Sie geht weiter, den Berg hinauf, in Richtung Hoist, einem kleinen Dorf mitten im Gebirge und fuehrt von dort aus wieder den Berg hinunter bis sie schliesslich in Oberholm endet.


-Brens-Burgen-Oebenau
Sie beginnt im Hauptbahnhof von Brens und fuehrt dann richtung Norden, bis sie an einem Gleisdreieck abbiegt und dann in richtung Westen nach Burgen. Von dort aus f￯﾿テ￯ᄒᄐhrt sie eingleisig in richtung S￯﾿テ￯ᄒᄐden vorbei an Relle nach Oberholm. In Oberholm verbindet sie sich mit der Brenser Nebenbahn und f￯﾿テ￯ᄒᄐhrt nach Westen. Die Strecke fuehrt von Oberholm bis Oebenau permanent auf flachem Gel￯﾿テ￯ᄒᄂnde. Erster Halt nach Oberholm ist M￯﾿テ￯ᄒᄐhl. Die Strecke macht nach Muehl eine Kurve in richtung Kallbe, was dann gleich der n￯﾿テ￯ᄒᄂchste Bahnhof w￯﾿テ￯ᄒᄂre. Nach Kallbe fuehrt sie nach Kallbehof, das unmittelbar vor Oebenau liegt. Oebenau ist dann die Endstation.


Die Strecke darf nicht zu kommerziellen Zwecken benutzt oder auf anderen Seiten hochgeladen werden. Szenarios duerfen nat￯﾿テ￯ᄒᄐrlich erstellt werden, wie und wo sie hochgeladen werden, ist allerdings Sache des Erstellers.



[English]

This is a fictitious German route from "Brens" to "Oebenau". It is about 40km long. It contains two parts: the route from Brens about Burgen and Oberholm to Oebenau and the old Brenser Nebenbahn to Oberholm.


-Brenser Nebenbahn (Brens-Oberholm)
The route begins in the old two-track railway station of Brens and then leads through the city to the new railway station. When it leaves the main station, it goes to the Brenser Hochland on a single-track, with stop at Am Berch (Brens) station. It goes up the mountain, towards Hoist, a small village in the middle of the mountains, and from there it descends the mountain until it finally ends in Oberholm.


-Brens Burgen Oebenau
It begins at Brens central station and then heads north until it turns off at a railway junction, then westwards to Burgen. From there, it leads single-track southwards past Relle to Oberholm. In Oberholm, it joins the Brenser Nebenbahn and goes west. The route runs permanently from Oberholm to Oebenau on flat terrain. First stop after Oberholm is M￯﾿テ￯ᄒᄐhl. The route makes a curve after M￯﾿テ￯ᄒᄐhl in the direction of Kallbe, which would be the next train station. After Kallbe, it leads to Kallbehof, which lies directly in front of Oebenau. Oebenau is then the final destination.


The route may not be used for commercial things and nobody is allowed to upload it on other sites, like rail-sim-forums. Of course you can create and upload scenarios, but where you upload them, is the matter of the creator.



[You need/Man braucht:]


-Koeln - Koblenz/Cologne - Koblenz
-Hamburg - Hannover
-Hagen - Siegen/Ruhr - Sieg Line
-European Loco & Asset Pack


(Alle Stadtnamen sind zufaellig erstellt und gewaehlt / all town names are created and choosen randomly)






Changelog v0.2.1
-MORE VEGETATION! :D (placed more grass along the whole route)
-fixed level crossings on the track
-fixed error at switch in Oebenau



Changelog v0.2.2
-Most of the signals are newly installed
-Some stop signs replaced
-Double signal removed in Oebenau
-More scenery
-Changes at catenary masts
-Audio installed in Oebenau
-Light in the station of Oebenau weakened
-little changes at Brens HBF
-terrain changes
댓글 10
DijonSenf  [작성자] 2017년 9월 4일 오전 8시 42분 
You'll need DB-Tracks, the TSC-PZB-Magnets, the H/V-Signals and KS-Signals by Signalteam, the TSC-Overheadwires and all objects of doctorgep, which you can find in the Hagen-Siegen V3 route. When the route is released, you'll find the links in the ReadMe on Rail-Sim.de.
Tomasz Grykien 2017년 9월 3일 오후 5시 15분 
What free add-ons will be required for what are they for what I have now?
DijonSenf  [작성자] 2017년 9월 2일 오전 12시 04분 
@Artek_PL] The next update is bigger than I thought. So, maybe in a few months. I'm sorry, but I've made some mistakes, so I have to build 80 kilometers of scenery, signals, overhead, etc..
Tomasz Grykien 2017년 8월 31일 오후 5시 51분 
When is the new version of this tour?
DijonSenf  [작성자] 2017년 6월 9일 오전 6시 21분 
Nice to see that you like the track!
Next update is planned for saturday or sunday (v0.2.2). But it's the last update for the workshop. For the next big update (V0.3) i used some freeware from Rail-Sim.de (german TrainSim-Community). So i can't stay in the workshop.
Deadly-Dorito 2017년 6월 8일 오후 3시 09분 
This is looking good :D Well done so far cant wait for updates
Re460 2017년 6월 4일 오전 5시 20분 
Great ! Thanks and congratulations
Tomasz Grykien 2017년 6월 3일 오후 4시 15분 
Super when zooming km on this route?
DijonSenf  [작성자] 2017년 6월 2일 오전 9시 22분 
@forcesius16 fiction
forcesius16 2017년 6월 2일 오전 9시 20분 
is it a real place or fiction?