İndirmek için abone ol
SAS

==== SAS ====
Stability Assist System
orbital tools

Author: DFPercush
Source code: github.com/DFPercush/SE-SAS
Feed the programmer: ko-fi.com/DFPercush

Setup:
If you want to use a cockpit besides the main one as the reference,
set 'DefaultControlBlock' below. Or use the 'control' command to set.
Make sure your craft has some gyros, power, and enable forward/back
thrusters for station keeping. That's about it.

Update: While locked to any direction, you can still give roll commands
by using Q and E from the active cockpit or control block. This may
only work from that one cockpit.

Commands:

off / stop: Halt program and turn off gyro overrides.

pro / prograde: The direction your ship is moving. Forward.

retro / retrograde: Facing backwards along your direction of movement.

norm / normal: Perpendicular to the plane of your orbit.
If you are moving east, normal would be north.

anti / antinormal: Opposite normal. If moving east, antinormal is south.

out: Radial out. Facing perpendicular to your orbit but
in the same plane. Basically, away from the planet.

in: Radial in. Towards the ground.

disp: Display debugging information.

keep: Maintains a certain min and max altitude.
(no args) Toggle on/off. Maintain the current orbit.
[number] Maintain a circular orbit of [number] height,
in meters, from the center of the planet.
[max] [min] Maintain an orbit of apogee [max] and perigee [min].
on|off|toggle Enable or disable this mode.

control [block] Sets the active cockpit, remote control, or ship controller.