F1® Manager 2022

F1® Manager 2022

517 ratings
How to get Perfect Setups in F1® Manager 2022 / Setup Calculator Website
By 1/6billionth
How to easily get Perfect Setups in F1® Manager 2022, and detailed explanation of how it works.
51
70
17
8
15
26
6
11
18
6
3
9
8
6
5
4
2
2
   
Award
Favorite
Favorited
Unfavorite
Setup Calculator
TL;DR: Website: https://f1setup.it/

2023 Guide:



If you are curious about how it works / why it would work, just scroll down, there will be some technical analysis in the following sections.

暂时没有加入中文或者其他语言支持的计划,不想写 i18n

How to use the Calculator
  • 1. Pick your Current Practice Setup on the Left
  • 2. Do a Practice Run, waiting for feedbacks.
  • 3. Choose corresponding feedbacks after the run.
  • 4. Click "FIND SETUP" to get a suggested setup, and start over.
  • In 3-5 attempts it would get you 99%-100% setups!

How Setup Works

Different setups could result in different car bias values, and better car setup could lead to a better performance, which could translate to race victories and championships.
This table explains how a difference in setup could affect the outcomes.

Setup
Oversteer
Braking Stability
Cornering
Traction
Straights
Front Wing Angle
+
-
+
-
-
Rear Wing Angle
-
+
+
+
-
Anti-Roll Distribution
-
+
-
+
Tyre Camber
+
-
+
-
Toe-Out
+
-
Technical Details
How these setups work?

After lots of datapoints collected, we could figure out the resulting bias is a linear function of the input, which means if you shift twice the length, the resulting bias would also be exactly doubled, which is the foundation of the analysis.

First we normalize the inputs and outputs to [0, 1] range, which means the leftmost is re-assigned value 0 and the rightmost is now 1.

After lots of pixel-counting we got this table:

Initial Values:
Setup
Oversteer
Braking Stability
Cornering
Traction
Straights
Left
0.5
0.45
0.2
0.25
1
Initial (Middle)
0.5
0.5
0.5
0.5
0.5
Right
0.5
0.55
0.8
0.75
0


Coefficients:
Setup
Oversteer
Braking Stability
Cornering
Traction
Straights
Front Wing Angle
0.4
-0.2
0.3
-0.15
-0.1
Rear Wing Angle
-0.4
0.2
0.25
0.25
-0.9
Anti-Roll Distribution
-0.1
0.15
-0.15
0.5
Tyre Camber
0.1
-0.25
0.25
-0.1
Toe-Out
0.2
-0.05

Which means if we move right 1 unit of Front Wing Angle, we would have 0.4 more units of Oversteer, 0.2 less Breaking Stability, 0.3 more Cornering, 0.15 less Traction and 0.1 less Straight, etc.
Feedbacks and Confidence Values
But what about feedbacks?

Since we got the relationships between setups and biases, we could know the exact value of the bias for any given setup. After another huge amount of trials, I figured out that -

(which d is the difference to the perfect bias)
optimal: d <= 0.007 (technically 39/5600, but 0.007 is between 39 and 40 so it would also work)
great: d <= 0.04
good: d <= 0.1
bad: d > 0.1

Confidence Values?

For each bias metric, -1% for 0.01 difference, which is capped at 20%
So if it's way too high/low for a specific metric, it would only count as -20%.
Summing them up makes the whole 100%, which is the Confidence Value.
Conversion and Converting Back
What if I already have a desired bias, and wanting to know what I should do to get it?

Based on linear algebra knowledges, basically the calculation of bias is technically matrix multiplication[en.wikipedia.org].

which 𝑴 =


And we have (** 𝑹: Bias Result / 𝑺: Setup)

𝑺𝑴 = 𝑹

and matrix product is invertible and associative, so we could have

𝑺𝑴(𝑴⁻¹) = 𝑹(𝑴⁻¹), which means 𝑹(𝑴⁻¹) = 𝑺

Since the matrix 𝑴 is Invertible[en.wikipedia.org], it's easy to calculate 𝑴⁻¹ =


After all, since 𝑺 is discrete in-game, the solution is only theoretical and not directly usable, but it could give you a basic guidance which requires you to do some fine-tuning.

But one good thing about being discrete: you could enumerate all possibilities, which is accurate and efficient since the possibilities are less than a million.
Conclusion
So what?

Since we already have some constraints, and we know how these setups work.
The remaining thing is finding the right setups from all 952560 possibilities matching these constraints.

Pick one from them, and try running again, the possibilities would be quickly reduced to the perfect one in 4-5 attempts, which is overwhelmingly effective.

Additionally, you could do some manual runs and set an initial value, which could lead to even better results.

Happy managing!


114 Comments
DT 24 Nov, 2024 @ 6:10pm 
Great
goldenarrows 14 Jul, 2024 @ 11:04am 
Hey guys...Is the app workable without internet connection?
1/6billionth  [author] 13 Aug, 2023 @ 7:50am 
The app's UI part is a complete rework. I'm unsure if "Bad+" or "Bad-" would cause more confusions so I have considered simply removing it at all, it's a last-minute addition before the actual app-store release.
Ziegenbagel 9 Aug, 2023 @ 3:34am 
Only confused weather between the app and site if Bad+ means Bad to High as in the app Bad+ is the bottom selection but on the site the bottom selection is bad to low.
1/6billionth  [author] 4 Aug, 2023 @ 2:06am 
Android App should work for 2023.
1/6billionth  [author] 4 Aug, 2023 @ 1:18am 
F1M Setup Calculator
Finarfin 3 Aug, 2023 @ 8:08pm 
What is the Android version of the app called? I can't seem to find it on the Play Store.
Zorth 3 Aug, 2023 @ 7:41pm 
Does it work for f1 2023?
Torsten Kings 1 Aug, 2023 @ 1:06am 
Thank you for your work. This tool is precious! When will the (android-)App get updated for season 2023?
Pickle Peky 31 Jul, 2023 @ 12:40pm 
Or you can just sim practice and your driver has 2-3 attribute points less which really doesn't make a difference