The game supports most of the input devices by default, but if you got here, you most likely have some problems. In 99% of cases, the information here will be enough, but if the guide did not help you, write to our support group on the discord: https://discord.gg/XbUM9eAZBU
Or to my email: [email protected]

There are 4 possible causes of problems:
* Game settings.
* Other plugged devices
* Steering wheel or controller, that not fully compatible with Unity.
* The absence of certain files on the computer.
And I managed to solve all of them for every single player that contacted me, so please follow the guide without skipping steps, even if you are 100% sure that certain step won’t help you.

1. In the game, when controlling bus, press F1 and select steering using the steering wheel







2. If the game behaves strangely, you have problems with shifting gears, or bus does not do what you want, control actions may be assigned incorrectly. Many actions in the game can be assigned simultaneously in the “buttons” section and the “axes” section of control options. If this is set incorrectly, pressing the buttons and turning the joysticks / steering wheel can overlap each other. Check for bindings that are duplicated without necessity.
















3. Steering wheel and brake/throttle axes work by determining its value between the minimum and maximum. For convenience, you can see these values ​​under the steering wheel and pedal sliders in the control settings. If the minimum and maximum values differ much from each other, press the “Reset” button and turn the steering wheel fully to the left and then fully to the right, then release and press the pedals. If this helps and the steering wheel / pedal sliders behave as they should, remember to save the settings.

Example of incorrect values:





Example of correct values:

4. If the problem persists, their source may be other connected controllers. Virtual controllers and controller emulation programs can also cause this problem. Disabling them, physically or through the device manager, should fix the situation. If you would like to avoid disabling them, the next step will help you.

5. If you got to this step, your device or combination of devices is not supported by the default Unity engine. You need to check the "Use Logitech API" checkbox next to the steering wheel and / or pedal axis.
When you click them, an API status message will appear below them, here are their possible values:

“API working”
Everything is in order. Adjust the axes as usual and enjoy the game. If even with a working API your steering wheel behaves incorrectly - contact us.

"Start failed"
Some computers require additional files for API to work:
Microsoft C ++ Redistributable 2013 (https://www.microsoft.com/ru-RU/download/details.aspx?id=40784)
And Logitech G-Hub. (https://www.logitechg.com/ru-ru/innovation/g-hub.html)
I insist you to take this seriously. Even if your controller was not produced by Logitech, the G-Hub comes with the files necessary for compatibility of controllers with Unity. You do not need to use G-Hub, after installation just close it and forget about it.

"No compatible devices found"
None of the connected devices support the API. Either your controller or USB port is damaged, or you have a very rare controller.
In this case I'm afraid that we won’t able to help you, but still contact us, maybe we will come up with some solution.

If you see any other message, also contact us, something unexpected happened.

We hope this guide was helpful. Have a good ride.