Remove the Large Rotor head on the "Rotor Bridge"
Add a small Rotor Head.
Add a Projector to the SMall Rotor head.
Rename it "Projector Bridge Subgrid"
Select the Blueprint Speedy Bridge
Select Keep Projecting and adjust the Projector the the Projector and the Projected projector overlap.
Weld it together

Remove the Large Rotor heads at the Front Rotors.
Built the Bridge Armor Using a Projector
Use a Lifting ship Like a Tauro and atach it from Above.
Fit the Bridge Armor with the Hangar dors facing the Front of the Speedy and line up the Rotor heads with the Rotors.
Disconnect the Landing gear and pull the Lifting ship out of the way.
Select the 2 Rotors on the speedy Labeled Front and press attach

Select the Timer Block Gear and hit trigger now
add a Large Rotor to all 3 Pistonheads.
Remove the Large Rotor Heads
add small Rotor Heads
add a Projector to all the Small Rotor heads. Rename them Projector Front, Projector Right and Projector Left acording to the Position on the Speedy.
Load the Blueprint Speedy Gear Front, Speedy Gear left and Speedy Gear Front in the Acording Projector.
Select Keep Projecting.
Adjust the Orientation adjust the Projector the the Projector and the Projected projector overlap
the Front Gear cammera should look back
the Left ones Camera Looks front and right
the right ones Camera looks left.
Select all the 3 Large Rotors Put them into a group labeled Rotors gear press save. Select the Timer Block gear and put the Rotor Gear group in and select share inertia tension on/off

Select the timer block lift 1 and hit Trigger now.
Wait till the piston is fully extanded. and add a Large advanced rotor to the piston head.
Remove the Large Rotor head.
Add a SMall Rotor head the a 1x3x3 small grid Conveyor Tube and a 3x3x3 Conveyor.
Add a Projector on the side of the Conveyor facing the Hangar Doors.
Load the Speedy Elevator Blueprint and adjust it.
adjust the Projector so that the Projector and the Projected projector overlap.
Weld it
Select the Top Button By perssing k and But the Timer Block Lift 1 on it by selecting trigger now.
Repeat with the Button on the Front Landing gear
Select the Lower Button and Put the Hangar door Down lift groupe in it by Selecting OPen/close
Right of the Two butons select the other Button and Put the Piston lift in it and Select reverse.

Add a large Advance Rotor ontop the Rotor Rotated 90° so it faces the RIght side of the Ship.
Add Havy armor blocks like shown in the Picture.
Add a large Projector on the Back of the Turret and Select the Blueprint Speedy Turret Base.
Weld it.
Rename The advance rotor Elevation MART. Select All MART Blocks on the SHip and Save them in the MART groupe.
Remove the Large Advanced Rotor head from the Large Advanced Rotor.
Add a SMall advanced Rotor Head.
Add a Small Medium Cargo Container.
Built a Projector on the Side with the blaster Block and Load the Blueprint Speedy Turret Gun.
adjust the Projector so that the Projector and the Projected projector overlap.
Built it.
Remove the Large Projector on the Back off the Turret.

The Printer is the most coplex part of the Speedy.

Expand the Large Piston Titeled Printer.
Add a Rotor Block to the large Piston head in the Hangar.
Delet the Larg grid Rotor head.
Selct the Rotor Large grid Rotor and add a small Rotor head.
Activate Rotor lock on the Rotor.

Built the Blast door blocks to the Projector Block as shown in the Picture.
Make sure the Orientation of the Blastdoor blocks i right.
Load the Blueprint Printer Base into the Projector and fix the Orientation and Cordinates to match what you have build

Built the rest of the Piston arm using 3 Small Pistons, 6 Blast door block and 1 Projector Block.
Add the Title Printer to the Projector.
add the title "Printer" to the 4 Pistons on the Arm and make sure the are all extended
Set the Extend speed of the Pston to 0.1 ms
Slect all 4 small printer Pistons and the 1 Large Printer piston and Put them in a group Titeled "Piston Printer Speedy" and save the group.

Go to the under side of the Printer Arm.
Select the Left Button (Press K)
Set the Groupe Welder Printer to Toggle ON/OFF when the Button is pushed.
Select the midle Button.
Set the small Printer Projector and to toggle ON/OFF when the Button is pushed.
Select the Right Button.
Set the groupe Printer Piston and select reverse when the Button is pushed.

Select the Projector Printer.
Select the Blueprint you want to Print.
Make sure the Orientation and Cordinates are right.
Make sure the Blueprint is not to big. 9 Small block high 14 small Blocks wide and 29 Small blocks in length. is the maximum
make sure all Needed components are present in your cargo scpae.
Atach the Projected Blueprint in one point to the Projector.
Hit the Welder Buton
Hit the Piston Button.

the ship should print now.

Hope you can do it. Let me know if your encountered some trouble.